Bachmann Update - Class 25

Posted by Warren Bennett on

Bachmann have provided a long awaited update on the OO Gauge Class 25 models. Which are currently expected late 2023, early 2024. Final price to be confirmed at a later date.

PRE ORDER HERE

These OO Scale models have been produced using new tooling, enabling them to have features that have not been seen in our previous models of this class of locomotive. Both of these new models have the following features in common:

  • NEM Coupling Pockets
  • Sprung Buffers
  • Powerful 5 Pole Motor with Twin Flywheels
  • Detailed and Decorated Cab Interior
  • Directional Lighting
  • Interior Cab Lighting (when used on DCC)
  • Pre-fitted speaker for ease of Digital Sound installation
  • Equipped with a Plux22 DCC Decoder Socket
  • Sprung Buffers
  • Accessory Pack

32-340 – Class 25/1 25057 BR Blue - Weathered

The locomotive features several grilles along both sides, although the boiler vent grilles have been plated over. The body side steps have also been plated over. 

On the roof, this model has rectangular exhaust and boiler ports, modelled fibreglass panels and a fan. Underneath the body of the locomotive, there is a 510 gallon fuel tank and a 580 gallon water tank between the bogies, with each tank having gauges on the sides.

32-341 – Class 25/2 D5282 BR Two-Tone Green (Small Yellow Panels)

32-341, which depicts Class 25/2 No. D5282 in BR’s Two-Tone Green livery with small yellow panels at each end. This locomotive carries the headcode 1T38 at one end and 9T61 on the other.

The cabs on the Class 25/2 did not have nose end doors, so the bottom edges of the windows are all flush with each other and the horizontal handrail covers the full width of the cab. The lamp bracket has been lowered to be half way between the buffer beam and the handrail.

This locomotive does not have as many grilles along the bodyside; instead, there are two small windows on each side offering a glimpse of the engine compartment which features its own dedicated lighting (when used on DCC). The boiler vent grilles and body side steps have not been plated over, although the boiler filler flap has. 

Along the roof, this model features rows of grilles along the sides, a circular exhaust port, raised roof panels and a fan. On the underside, this locomotive is equipped with a 510 gallon fuel tank with gauge, but does not carry a water tank.


Share this post



← Older Post Newer Post →