Accessory Decoder CDU Solenoid Drive SX 2-Way with Power-Off Memory and Protective Case By DCC Concepts | Code: DCD-ADS-2sx | Any Scale
We guarantee the price of our forthcoming releases for Locomotives, coaches and wagons to be at least 10-25% less than the RRP at the time of release. We also offer large discounts on many of our railway accessory ranges. We continually monitor other retailers to ensure that our prices are always competitive. Please note limited editions and exclusive products are not included in the price promise offer.
Have one to sell? Sell it to Rails of Sheffield
You purchased this item on
|Product category||Accessory Decoders , Digital Control Systems and Accessories , The Cobalt Collection ,|
|Product scale||Any Scale|
ADS-2fx is a high-performance, high-feature level 2-output DCC accessory decoder with built-in CDU on every output designed to power Seep, Hornby, Peco and similar high current point motors properly and make sure they change every single time!
ADS-2fx can be powered with either DC or with DCC. Power supply loading is very low, and because it stores all the energy it needs on-board, when it changes your solenoids it won’t drain train-running power.
Addressing is so easy that we call it “set” rather than programming – there are no CVs to set and there is no need for special programming either.
The ADS2-fx is easy to install, set up and connect to your layout systems:
Screw connectors means no need to solder One power input point for all outputs Simple 3-wire output to the device being controlled 3 high power terminals for direct connection of point frogs and/or panel LEDs and/or signal 3 switch terminals with the option of one or two push-button switches Feedback / IO data is provided via a pair of solder-pads– These output a low voltage as needed with output changing from 0v to +5v for direct connection of position feedback to systems that require it – or to any computer IO interface at all. Main/branch indication can be set by just swapping wires as needed! Simple “SET” / “RUN” 2-position switch for easy addressing. Flat back for easy layout mounting. ADS-2fx simply does everything that Solenoid users have always wanted but never received from ANY solenoid motor accessory decoder in the past. ADS-2fx also has really high power available so it can control multiple point motors on each of its outputs, so it is economical too!
- Cobalt iP DCC Decoder FX Stall Motor Drive (4-way Output)
- Cobalt iP DCC Decoder FX Stall Motor Drive (6-way Output)
- Cobalt iP DCC Decoder FX Stall Motor Drive (8-way Output)
- Accessory Decoder CDU Solenoid Drive SX 8-Way with Power-Off Memory and Protective Case
- Cobalt Alpha Encoder Unit
- Cobalt Alpha Switch D Set Digital Devices (12 x Blue)
- Cobalt AlphaSwitch-D for Digital Devices Green (12)
- Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective Case
- Cobalt AlphaSwitch-D for Digital Devices Red (12)
- Cobalt iP DCC Decoder FX Stall Motor Drive (2-way Output)