"Silver +" Next 18 with NEM 663 plug By Digital Plus by Lenz | Code: 10318-01 | Any Scale
We guarantee the price of our forthcoming releases for Locomotives, coaches and wagons to be at least 10-25% less than the RRP at the time of release. We also offer large discounts on many of our railway accessory ranges. We continually monitor other retailers to ensure that our prices are always competitive. Please note limited editions and exclusive products are not included in the price promise offer.
Have one to sell? Sell it to Rails of Sheffield
You purchased this item on
|Manufacturer||Digital Plus by Lenz|
|Product category||Decoders , Loco Decoders ,|
|Product scale||Any Scale|
The Lenz Digital Plus Silver locomotive decoder is suitable for all DC Locos with Next18 interface. At the moment Next 18 is found in Bachmann Liliput and Tillig products.
Some information on Lenz Decoders well worth noting if you are considering which decoder to buy, over the years we have only experienced 1 genuine failure on a Lenz decoder and 1 failure on a controller despite having sold many hundreds. One of the main reasons for this is that accross the range of lenz decoders they are doubly protected by good quality circuit breaking circuits where a short circuit is detected but also where a long overload causing thermal damage. This means that instead of simply blowing when under conditions of short or overload like many US based decoders with inferior circuitry they will simply cut out and allow you ro reset the decoder either for thermal reset or overall reset. Essentially it is very difficult to lose a Lenz decoder through shorts so you get a second chance instead of a puff of smoke. They are more expensive but they are worth it
The characteristics of the decoder are:
Super smooth and silent high frequency back emf motor control Supports Automatic Braking Control (ABC) Shunting speed on F3 Suitable for operation with 14/27 or 28/128 speed steps Operation on conventional DC layouts is posible or may be disabled Motor and function outputs have short circuit protection Seven function outputs rated at 500mA each with advanced function mapping Directional or independent lighting with dimming and special effects Support for Multiple traction and long addresses (Loco addresses up to 9,999) Support for programming on the mainline (Programming on Main POM) Support for all forms of programming as described in NMRA RP-9.2.3
- Power 3 for Gold Decoder USP
- "Standard+ V2" 1.0/1.8A 3 function output A,B,C.
- "Silver mini +"0.5/0.8A with cable 2 Function outputs
- "Silver mini +"0.5/0.8A with NEM 651 plug
- "Silver 21 +" 1.0/1.8A with 21 pin plug
- "Silver Direct +" 1.0/1.8A with NEM 652 plug
- "Gold mini +"0.5/0.8A with cable 2 Function outputs
- "Gold mini +" 0.5/0.8A with NEM 651 plug 2 Function outputs
- "Gold +" 1.0/1.8A with cable and NEM 652 plug
- "Silver +" PluX 12 0.75/1.0A - 2 Function outputs with NEM 653 plug
- Power 1 for Gold Decoder USP