{"title":"Point Motors","description":"","products":[{"product_id":"dcc-concepts-dcd-acl-rj12-6pin-curly-cord-for-nce-powercab-and-cobalt-alpha-2m6ft","title":"DCD-ACL RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m\/6ft","description":"\u003cp\u003eRJ12 6pin Curly Cord for NCE Powercab \/ Procab \/ Engineer’s Throttle and Cobalt Alpha – 2m\/6ft of cable coiled. Will stretch to approx 1.5m when in use.\u003c\/p\u003e\n\u003cp\u003eCurly cable with RJ12 connectors that can be used for Alpha panel or NCE connections. All 6 pins are connected, making this suitable for substituting the NCE PowerCab “flat” cable.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450532593736,"sku":"DCC-DCD-ACL","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCD-ACL.jpg?v=1604504570"},{"product_id":"dcc-concepts-dcd-ads-2sx-accessory-decoder-cdu-solenoid-drive-sx-2-way-with-power-off-memory-and-protective-case","title":"DCD-ADS-2sx Accessory Decoder CDU Solenoid Drive SX 2-Way with Power-Off Memory and Protective Case","description":"\u003cp\u003eAccessory Decoder CDU Solenoid Drive SX 2-Way with Power-Off Memory and Protective Case\u003c\/p\u003e\n\u003cp\u003eADS-2sx is an easy-to-use 2-way accessory decoder for solenoids with power-off memory.\u003c\/p\u003e\n\u003cp\u003eADS-2sx has a CDU built-in to each output and is the most reliable and most powerful solenoid decoder available, yet it stores all its power on-board so does not drain your DCC track power! Each channel also has a digitally addressable relay which has multiple uses including frog power control.\u003c\/p\u003e\n\u003cp\u003ePacked with features including a CDU discharge button, Panel LED or Signal Control, Push-Button Option and Frog Power Switching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth 64mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth 64mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo make sure there is a version for every need, ADS Decoders are also available in 4 and 8 way variants\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450532986952,"sku":"DCC-DCD-ADS-2sx","price":36.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/files\/Screenshot2024-08-08094752.jpg?v=1723106929"},{"product_id":"dcc-concepts-dcd-ads-4sx-accessory-decoder-cdu-solenoid-drive-sx-4-way-with-power-off-memory-and-protective-case","title":"DCD-ADS-4sx Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective Case","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eAccessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective Case\u003c\/p\u003e\n\u003cp\u003eADS-4sx is an easy-to-use 4-way DCC accessory decoder for solenoid turnout motors with power-off memory.\u003c\/p\u003e\n\u003cp\u003eADS-4sx has a CDU built-in to each output and is the most reliable and most powerful solenoid decoder available, yet it stores all its power on-board so does not drain your DCC track power!\u003c\/p\u003e\n\u003cp\u003ePacked with features including a CDU discharge button, Panel LED or Signal Control, Push-Button Option and Frog Power Switching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth 115mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth 64mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo make sure there is a version for every need, ADS Decoders are also available in 2 and 8 way variants.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533052488,"sku":"DCC-DCD-ADS-4sx","price":55.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/files\/ADS-4sx-Overview-JPG-scaled.jpg?v=1723106981"},{"product_id":"dcc-concepts-dcd-ads-8sx-accessory-decoder-cdu-solenoid-drive-sx-8-way-with-power-off-memory-and-protective-case","title":"DCD-ADS-8sx Accessory Decoder CDU Solenoid Drive SX 8-Way with Power-Off Memory and Protective Case","description":"\u003cp\u003eAccessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective Case\u003c\/p\u003e\n\u003cp\u003eADS-4sx is an easy-to-use 4-way DCC accessory decoder for solenoid turnout motors with power-off memory.\u003c\/p\u003e\n\u003cp\u003eADS-4sx has a CDU built-in to each output and is the most reliable and most powerful solenoid decoder available, yet it stores all its power on-board so does not drain your DCC track power!\u003cbr\u003eEach channel also has a digitally addressable relay which has multiple uses including frog power control.\u003c\/p\u003e\n\u003cp\u003ePacked with features including a CDU discharge button, Panel LED or Signal Control, Push-Button Option and Frog Power Switching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth 115mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth 64mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo make sure there is a version for every need, ADS Decoders are also available in 2 and 8 way variants\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533150792,"sku":"DCC-DCD-ADS-8sx","price":93.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/files\/Screenshot2024-08-08095049.jpg?v=1723107087"},{"product_id":"dcc-concepts-dcd-aec-cobalt-alpha-central-integrated-12-way-digital-switch","title":"DCD-AEC Cobalt Alpha Central Integrated 12 Way Digital Switch","description":"\u003cp\u003eThe ultimate in simple-to-install control panels. Have an NCE system? Take it out of the box, plug it into your command bus with the cable supplied and your installation is finished!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt is usable with DCC… and even DC modellers can adopt it if they use an accessory circuit for their point motors etc… by connecting to\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-snx-cobalt-alpha-dcc-power-bus-driver-and-sniffer-adapter\"\u003eSniffer\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.dccconcepts.com\/product\/alpha-sniffer\/\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-aux-cobalt-alpha-box-unit\"\u003eAlpha Box\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand either\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcp-cb1dip-cobalt-ip-digital-point-motor-single-pack\"\u003eCobalt iP Digital Point Motors\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e or\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-ads-8sx-accessory-decoder-cdu-solenoid-drive-sx-8-way-with-power-off-memory-and-protective-case\"\u003eAccessory decoders\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon turnouts etc.)\u003c\/p\u003e\n\u003cp\u003eSetting up takes only a moment and adding some lovely fine detail such as etched numbering for your digital accessories is a relaxed and very satisfying process…\u003c\/p\u003e\n\u003cp\u003eThe result is a sophisticated and unbelievably easy to use control panel. Multiple “Alpha Central” units can be connected together to control the largest station or yard, and you can even move them from place to place… they connect anywhere that you have access to the command bus!\u003c\/p\u003e\n\u003cp\u003eEach Alpha Central has 24 illuminated switches controlling 12 accessory decoder outputs. This really IS the answer to many modeller’s control-panel prayers!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSize\u003c\/u\u003e\u003cbr\u003eWidth 250mm\u003cbr\u003eDepth 116mm\u003cbr\u003eHeight 30mm\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533249096,"sku":"DCC-DCD-AEC","price":144.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/dcd-aec.jpg?v=1604504577"},{"product_id":"dcc-concepts-dcd-aeu-cobalt-alpha-encoder-unit","title":"DCD-AEU Cobalt Alpha Encoder Unit","description":"\u003cp\u003eDCCconcepts Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlpha AEU turns any form of standard switch into a digital control device, making it possible to create complex control panels with simple wiring… in fact you will need only one cable between your panel and the layout! Simply connect the left, centre and right wires from your switch into the convenient spring terminals on Cobalt \u003cstrong\u003eα\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlpha AEU!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDCCconcepts Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlpha is equally usable by all modellers in all of the common gauges, whether you drive the trains with AC, DC or DCC power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is needed?\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAs bought, Cobalt AEU is directly connectable to the command bus of all\u003cspan\u003e \u003c\/span\u003eNCE DCC systems\u003cspan\u003e \u003c\/span\u003ewith a standard\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-acl-rj12-6pin-curly-cord-for-nce-powercab-and-cobalt-alpha-2m6ft\"\u003eRJ12 cable\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e. If you have\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-lzx-cobalt-alpha-adapter-lenz\"\u003eLenz\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-gmx-cobalt-alpha-adapter-gaugemaster\"\u003eMRC\/Gaugemaster\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-dtx-cobalt-alpha-adapter-digitrax\"\u003eDigitrax\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e, simply add the appropriate adapter and Cobalt α Alpha AEU will now connect to your existing DCC command bus through\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-aux-cobalt-alpha-box-unit\"\u003eCobalt \u003cstrong\u003eα\u003c\/strong\u003e Alpha BOX\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eWith Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e Alpha BOX\u003cspan\u003e \u003c\/span\u003eand AC and DC modellers can immediately take advantage of Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlpha AEU to reduce control panel complexity. (DCC brands with sniffer ports can use the\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-snx-cobalt-alpha-dcc-power-bus-driver-and-sniffer-adapter\"\u003eAlpha Sniffer\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e).\u003c\/p\u003e\n\u003cp\u003eMultiple Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e Alpha AEU units can be connected in series… or in parallel. Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e Alpha AEU allows up to 2044 accessory numbers to be used!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSize\u003c\/u\u003e\u003cbr\u003eWidth 180mm\u003cbr\u003eDepth 60mm\u003cbr\u003eHeight 16mm\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533281864,"sku":"DCC-DCD-AEU","price":67.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCD-AEU.jpg?v=1604504578"},{"product_id":"dcc-concepts-dcd-atb-cobalt-alphaswitch-add-on-pack-blue-12-pack","title":"DCD-ATB Cobalt AlphaSwitch Add-on Pack – Blue (12 Pack)","description":"\u003cp\u003eWe have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle.\u003c\/p\u003e\n\u003cp\u003eAs with Alpha-Switch, there are 4 colours available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-atr-cobalt-alphaswitch-add-on-pack-red-12-pack\" style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eDCP-ATR\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eswitches have Red LEDs,\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-atg-cobalt-alphaswitch-add-on-pack-green-12-pack\" style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eDCP-ATG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehave Green,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDCP-ATB\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave Blue and\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-atw-cobalt-alphaswitch-add-on-pack-white-12-pack\" style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eDCD-ATW\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003econtains White LEDs.\u003c\/p\u003e\n\u003cp\u003eEach pack contains 12 switches, 12 harness and 12 mounting bezels, plus fixing screws.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533478472,"sku":"DCC-DCD-ATB","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-ATB.png?v=1617282001"},{"product_id":"dcc-concepts-dcd-atr-cobalt-alphaswitch-add-on-pack-red-12-pack","title":"DCD-ATR Cobalt AlphaSwitch Add-on Pack – Red (12 Pack)","description":"\u003cp\u003eCobalt AlphaSwitch Add-on Pack – Red (12 Pack)\u003c\/p\u003e  \u003cp\u003eAlpha-Switch-A and Alpha-Switch-D use the same switch type.\u003c\/p\u003e  \u003cp\u003eWe have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle.\u003c\/p\u003e  \u003cp\u003eAs with Alpha-Switch, there are 3 colours available.\u003c\/p\u003e  \u003cp\u003eDCP-ATR switches have Red LEDs, DCP-ATG have Green and DCP-ATB contains Blue LEDs.\u003c\/p\u003e  \u003cp\u003eEach pack contains 12 switches, 12 harness and 12 mounting bezels, plus fixing screws.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533511240,"sku":"DCC-DCD-ATR","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-ATR.png?v=1617282001"},{"product_id":"dcc-concepts-dcd-aux-cobalt-alpha-box-unit","title":"DCD-AUX Cobalt Alpha Box Unit","description":"\u003cp\u003e\u003cstrong\u003eα\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlpha-Box is a five-amp semi-intelligent DCC~Digital control booster interface that will allow DC or AC based layouts to take advantage of digital control with no need to convert all other operations to DCC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eα\u003c\/strong\u003e-Box is also the perfect way for those with basic DCC systems to add to their accessory control ability without changing their DCC system.\u003c\/p\u003e\n\u003cp\u003eDesigned to work perfectly with Cobalt\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlpha, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eα\u003c\/strong\u003e-Box can also be used as a 5 amp booster for NCE Power Cab and other DCC systems.\u003c\/p\u003e\n\u003cp\u003ePresented in a sophisticated aluminium case, the α-Box is a high quality addition to your DCC system. A 5 amp 12~18v regulated DC power supply is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSize\u003c\/u\u003e\u003cbr\u003eWidth 172mm\u003cbr\u003eDepth 116mm\u003cbr\u003eHeight 30mm\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533576776,"sku":"DCC-DCD-AUX","price":110.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-AUX.jpg?v=1626550933"},{"product_id":"dcc-concepts-dcd-cac-6-wire-flat-cable-wrj12-connectors-500mm","title":"DCD-CAC 6-wire Flat Cable w\/RJ12 Connectors (500mm)","description":"\u003cp\u003e6-wire Flat Cable w\/RJ12 Connectors (500mm)\u003c\/p\u003e  \u003cp\u003e500mm 6-wire flat type RJ12 lead for Cobalt Alpha connection. Also suitable for use with Cobalt Alpha or NCE PowerCab\/ProCab or other digital devices using RJ 12 connections.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450533642312,"sku":"DCC-DCD-CAC","price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-CAC-content-w.png?v=1604504584"},{"product_id":"dcc-concepts-dcd-dss-2-alpha-switch-d-solenoid-accessory","title":"DCD-DSS.2 Alpha-Switch-D Solenoid Accessory","description":"\u003cp\u003eAlpha-Switch-D Solenoid Accessory\u003c\/p\u003e  \u003cp\u003eCobalt Alpha-Switch-D Solenoid Accessory has three 3-wire outputs.  Designed to fit the output terminals of the DCD-DSG, DSR \u0026amp; DSB models, the DCD-DSs is designed to change the +5V\/0V output to a momentary SPDT output necessary for the operation of the ADS range of solenoid motor decoders.\u003c\/p\u003e  \u003cp\u003eRequires 12v DC power which can be taken from the Alpha Switch D board.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450534461512,"sku":"DCC-DCD-DSS.2","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DSS-2-image.jpg?v=1604504595"},{"product_id":"dcc-concepts-dcd-dtx-cobalt-alpha-adapter-digitrax","title":"DCD-DTX Cobalt Alpha Adapter Digitrax","description":"\u003cp\u003eCobalt Alpha Adapter Digitrax\u003c\/p\u003e\n\u003cp\u003eThe DCD-DTX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a Digitrax DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Digitrax DCC system command bus.\u003c\/p\u003e\n\u003cp\u003eHow does the Cobalt α Alpha system work? \u003cstrong\u003e\u003ca href=\"https:\/\/www.dccconcepts.com\/manual\/cobalt-alpha-range-booklet\/\"\u003eCobalt Alpha Range Booklet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450534494280,"sku":"DCC-DCD-DTX","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-DTX-2T-1.jpg?v=1693915165"},{"product_id":"dcc-concepts-dcd-gmx-cobalt-alpha-adapter-gaugemaster","title":"DCD-GMX Cobalt Alpha Adapter Gaugemaster","description":"\u003cp\u003eCobalt Alpha Adapter for Gaugemaster Prodigy.\u003c\/p\u003e  \u003cp\u003eThe DCD-GMX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a Gaugemaster or MRC DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Gaugemaster or MRC DCC system command bus.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450534527048,"sku":"DCC-DCD-GMX","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-GMX.png?v=1693915261"},{"product_id":"dcc-concepts-dcd-gs-br-12x-2-wire-steam-era-3-light-ground-signal","title":"DCD-GS-BR 12x 2-wire STEAM Era 3-light Ground Signal","description":"\u003cp\u003e12x 2-wire LMS\/BR Ground Signal – A pack of 12 x 3-lamp plug and play signals in 4mm scale (OO), supplied with NO control board.\u003c\/p\u003e  \u003cp\u003eThe DCD-GS-BR is the classic 3-lamp ground signal. It was first introduced in the mid 1930’s and spread far and wide. Most are still in use today. This makes it a great choice for layouts of many prototypes and periods. The STEAM era version has a slightly yellower “White” aspect, as ground signals in that period were often covered with tar-based “weathering” from steam locomotive induced pollution.\u003c\/p\u003e  \u003cp\u003eUse as add-on for Alpha Mimic control signal systems OR use independently if you wish. Please note: If used with other power sources, resistors MUST be added. (we suggest 5,000 ohms or 5k resistors)\u003c\/p\u003e  \u003cp\u003eFailed LEDs because of incorrect connection will not be covered by warranty.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450534592584,"sku":"DCC-DCD-GS-BR","price":63.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-GS-BR-D.png?v=1617282011"},{"product_id":"dcc-concepts-dcd-lzx-cobalt-alpha-adapter-lenz","title":"DCD-LZX Cobalt Alpha Adapter Lenz","description":"\u003cp\u003eCobalt Alpha Adapter Lenz\u003c\/p\u003e\n\u003cp\u003eThe DCD-LZX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a LENZ DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Lenz DCC system command bus \/ X-bus.\u003c\/p\u003e\n\u003cp\u003eHow does the Cobalt α Alpha system work? \u003cstrong\u003e\u003ca href=\"https:\/\/www.dccconcepts.com\/manual\/cobalt-alpha-range-booklet\/\"\u003eCobalt Alpha Range Booklet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450534985800,"sku":"DCC-DCD-LZX","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-LZX.png?v=1604504622"},{"product_id":"dcc-concepts-dcd-me6-150-alpha-mimic-extension-leads-6x-150mm","title":"DCD-ME6.150 Alpha Mimic Extension Leads – 6x 150mm","description":"\u003cp\u003eAlpha Mimic Extension Leads – 6pcs 150mm extension leads for Alpha Mimmic LEDs and Ground Signals.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450535018568,"sku":"DCC-DCD-ME6.150","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-ME6.150-1.jpg?v=1604504624"},{"product_id":"dcc-concepts-dcd-me6-750-alpha-mimic-extension-leads-6x-750mm","title":"DCD-ME6.750 Alpha Mimic Extension Leads – 6x 750mm","description":"\u003cp\u003e6pcs 750mm extension leads for Alpha Mimic LEDs and Ground Signals.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450535116872,"sku":"DCC-DCD-ME6.750","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-ME6.150-1_90b23616-0fe3-4f53-8be5-3a51510bf162.jpg?v=1604504629"},{"product_id":"dcc-concepts-dcd-mma3-multiple-mimic-led-connector-3-pack","title":"DCD-MMA3 Multiple Mimic LED Connector (3 pack)","description":"\u003cp\u003eMultiple Mimic LED Connector, sold in packs of 3, this adapter will let you connect up to six Mimic LEDs to one Mimic output.\u003c\/p\u003e  \u003cp\u003eJoin one-to-one or many to one output without complication! The easy way to add multiple indication to one output of Alpha Mimic.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450535411784,"sku":"DCC-DCD-MMA3","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/MIMIC-6-Joiner.jpg?v=1604504634"},{"product_id":"dcc-concepts-dcd-my3-3-pack-of-simple-y-connectors-for-alpha-mimic-and-alpha-mimic-ground-signals","title":"DCD-MY3 3-pack of Simple Y Connectors for Alpha Mimic and Alpha Mimic Ground Signals","description":"\u003cp\u003eA 3-pack of simple Y connectors for Alpha Mimic and Alpha Mimic ground signals.\u003c\/p\u003e  \u003cp\u003eOne output is standard, the other is reversed – allowing the reversal of signal aspects.\u003c\/p\u003e  \u003cp\u003eCan also be used for Alpha Mimic panel LEDs.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536099912,"sku":"DCC-DCD-MY3","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-MY3.jpg?v=1604504639"},{"product_id":"dcc-concepts-dcd-pwrauxaec-alpha-system-upgrade-bundle-with-accessory-control","title":"DCD-PWRAUXAEC Alpha System Upgrade Bundle with Accessory Control","description":"\u003cp\u003eBundle Contents 1x Alpha Premium 18V \/ 5A Power Supply (relevant model for your country will be supplied) , 1x Alpha Box and 1x Alpha Central\u003c\/p\u003e\n\u003cp\u003ePowerful upgrade for your model railway – 5A of smooth, reliable power to improve performance and reliability along with the sleek Alpha Central to control your digital accessories. Simply connect your Starter Set to Alpha Box and then to the track. Smooth, reliable power is provided by Alpha Power. Alpha Central also connects to Alpha Box to provide an instant ready-made control panel for all your digital accessories!\u003c\/p\u003e\n\u003cp\u003eJust add up to 12 digital turnout motors of your choice to achieve complete digital control of your layout – this is DCC as it was always meant to be!\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536427592,"sku":"DCC-DCD-PWRAUXAEC","price":279.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/files\/DPD-PWRAUXAEC-v2.jpg?v=1731594242"},{"product_id":"dcc-concepts-dcd-rgb-3-wire-rgb-ribbon-5m","title":"DCD-RGB 3 Wire RGB Ribbon (5m)","description":"\u003cp\u003eA 5m length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red\/green\/black) . Each wire is equivalent to 16x 0.2 and it is also ideal for connection of Cobalt iP Digital motors by using the red\/black for connection to the power bus and the green for frog connections.\u003cbr\u003e\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536558664,"sku":"DCC-DCD-RGB","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCD-RGB.jpg?v=1604504645"},{"product_id":"dcc-concepts-dcd-sdc3-dcc-decoder-converter-3-wire-to-2-wire-3-pack","title":"DCD-SDC3 DCC Decoder Converter 3 Wire to 2 Wire (3 Pack)","description":"\u003cp\u003eDCC Decoder Converter 3 Wire to 2 Wire (3 Pack)\u003c\/p\u003e\n\u003cp\u003ePack of three solenoid decoders. The SDC is a clever device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.\u003c\/p\u003e\n\u003cp\u003eClick to view our\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-sdc6-dcc-decoder-converter-3-wire-to-2-wire-6-pack\"\u003e6 pack\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536624200,"sku":"DCC-DCD-SDC3","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SDC3-content-w.png?v=1604504645"},{"product_id":"dcc-concepts-dcd-sdc6-dcc-decoder-converter-3-wire-to-2-wire-6-pack","title":"DCD-SDC6 DCC Decoder Converter 3 Wire to 2 Wire (6 Pack)","description":"\u003cp\u003ePack of six solenoid decoders. The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.\u003c\/p\u003e\n\u003cp\u003eClick to view our \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcd-sdc3-dcc-decoder-converter-3-wire-to-2-wire-3-pack\" style=\"color: #2b00ff; text-decoration: underline;\"\u003e3 pack\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536689736,"sku":"DCC-DCD-SDC6","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SDC6-content-w.png?v=1604504646"},{"product_id":"dcc-concepts-dcd-sj6-alpha-switch-lead-connectors","title":"DCD-SJ6 Alpha Switch lead Connectors","description":"\u003cp\u003eAlpha Switch lead Connectors – sold in packs of 6, this is the most basic “joiner” for connecting Alpha Switch extension leads.\u003c\/p\u003e\n\u003cp\u003eBecause control panels are not large, you’ll probably need only one pack for even a larger control panel.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536820808,"sku":"DCC-DCD-SJ6","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SJ6.jpg?v=1604504649"},{"product_id":"dcc-concepts-dcd-sma3-alpha-to-mimic-led-adapters","title":"DCD-SMA3 Alpha to Mimic LED Adapters","description":"\u003cp\u003eAlpha to Mimic Adapters – 3 pcs. This adapter will allow you to add several Mimic LEDs to the routes in your AlphaSwitch controlled control Panels\u003c\/p\u003e  \u003cp\u003ePlease note – the Mimic LED should match your Alpha Switch LED colour. If you use different colours, you will need to add a resistor so they will function properly.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536853576,"sku":"DCC-DCD-SMA3","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SMA3.jpg?v=1604504665"},{"product_id":"dcc-concepts-dcd-snx-cobalt-alpha-dcc-power-bus-driver-and-sniffer-adapter","title":"DCD-SNX Cobalt Alpha DCC Power Bus Driver and SNIFFER Adapter","description":"\u003cp\u003eThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to any layout. It works equally well for DC or DCC users who wish to employ Alpha, Alpha Mimic or Cobalt Digital products.\u003c\/p\u003e\n\u003cp\u003eDCD-SNX is also the perfect “sniffer” interface for easy connection of DCCconcepts “Alpha” products to DCC controllers that have sniffer ports (such as ECOS or Z21). Of course, Alpha Sniffer will also work with ANY other brand of accessory decoder that allows simple “set-run” addressing of its outputs.\u003c\/p\u003e\n\u003cp\u003eThe ideal power supply for the Sniffer is the DCP-PS12 power supply. it delivers 1.5 amps at 12v – Click\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcp-ps12-12v-15amp-regulated-power-supply\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efor details.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSize\u003c\/u\u003e\u003cbr\u003eWidth 79mm\u003cbr\u003eDepth 61mm\u003cbr\u003eHeight 22mm\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536886344,"sku":"DCC-DCD-SNX","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SNX.png?v=1615395034"},{"product_id":"dcc-concepts-dcd-spt-alpha-switch-templates-pack-of-36","title":"DCD-SPT Alpha Switch Templates (Pack of 36)","description":"\u003cp\u003eAlpha Switch Templates help you lay out the panel switch position easily.\u003c\/p\u003e  \u003cp\u003eThese pre-cut and self-adhesive templates will help you to plan your panel so that the switches do not interfere with each other.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536919112,"sku":"DCC-DCD-SPT","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/Alpha-Template.jpg?v=1604504650"},{"product_id":"dcc-concepts-dcd-sw12-150-alpha-aeu-alpha-switch-wires","title":"DCD-SW12.150 Alpha AEU-Alpha Switch Wires","description":"\u003cp\u003eAlpha AEU-Alpha Switch Wires – Pre-cut and tinned to make connection to Alpha AEU even easier!\u003c\/p\u003e  \u003cp\u003eA pack of 12 ready to use Red, Green and Black wires (150mm).\u003c\/p\u003e  \u003cp\u003eA very easy way to connect Alpha AEU and Alpha Switch – or any other switch you choose!\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536951880,"sku":"DCC-DCD-SW12.150","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SW12150.jpg?v=1604504683"},{"product_id":"dcc-concepts-dcd-sw3-10-alpha-switch-extension-wire","title":"DCD-SW3.10 Alpha Switch Extension Wire","description":"\u003cp\u003e10 metre pack of Alpha Switch Extension Wire – Supplied with heat shrink, this will give those who like to solder an economical way to extend Alpha Switch connections.\u003c\/p\u003e  \u003cp\u003eUse with care as wrong wiring will invalidate warranty.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450536984648,"sku":"DCC-DCD-SW3.10","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SW310.jpg?v=1604504654"},{"product_id":"dcc-concepts-dcd-sy3-cobalt-alpha-switch-y-connectors-3-pack","title":"DCD-SY3 Cobalt Alpha Switch Y-Connectors (3 Pack)","description":"\u003cp\u003eCobalt Alpha Switch Y-Connectors (3 Pack)\u003c\/p\u003e  \u003cp\u003eNeed to parallel 2 or more Alpha-Switches or perhaps have one switch control two devices?\u003c\/p\u003e  \u003cp\u003eEven this is no problem… this “2 into 1” Y adapter PCB takes two switches one side, one on the other, allowing you to just plug them together – no wire cutting, stripping or soldering at all!\u003c\/p\u003e  \u003cp\u003eEach pack includes 3 Y connectors at a very low cost!\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450537017416,"sku":"DCC-DCD-SY3","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCD-SY3-content-w.png?v=1604504653"},{"product_id":"dcc-concepts-dcp-cb12dip-cobalt-ip-digital-point-motor-12-pack","title":"DCP-CB12DIP Cobalt iP Digital Point Motor (12 Pack)","description":"\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eCobalt iP Digital (12 Pack) – “Intelligent Power” DCC\/DIGITAL Point Motors\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cp\u003eCobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor\u003c\/p\u003e\n\u003cp\u003eTwelve Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use \u003cstrong\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThe Cobalt-iP Digital’s super-low static current draw means very low power bus loading and the Cobalt-iP Digital is also able to cope with a very wide range of DC or DCC power supply voltages. We prefer 9~12V regulated power for DC, but any DCC voltage from 7 to 23 volts is acceptable.\u003c\/p\u003e\n\u003cp\u003eCobalt-iP Digital is supplied with the throw bar already centred for easy installation.\u003c\/p\u003e\n\u003cp\u003eYou can activate and de-activate self-centring and even swap the throw direction with a simple software command. This allows easy matching to layout needs, software driven computer displays, track diagrams or computer control.\u003c\/p\u003e\n\u003cp\u003eWith Cobalt-IP “Intelligent Power” Digital Motors, you also have all the connection versatility you could ever need already built in. Frog power needs only one added wire, and a totally separate SPDT changeover switch can facilitate interlocking, control of signal feather indicators or ground signals, etc.\u003c\/p\u003e\n\u003cp\u003eCobalt iP Digital also features the ability to add panel switches or control via DCC. The connection terminals used for panel switch connection are also able to give direct high\/low state computer or DCC system feedback, so one motor really CAN do it all.\u003c\/p\u003e\n\u003cp\u003eAdd to the above the ability to work with DC and super-simple wiring or DCC operation, or to combine digital and analog control… and Cobalt iP Digital really is the best choice for all layouts, no matter how you choose to power the trains!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450541998152,"sku":"DCC-DCP-CB12DIP","price":288.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CB12DiP.png?v=1693913929"},{"product_id":"dcc-concepts-dcp-cb12ip-cobalt-ip-analog-point-motor-12-pack","title":"DCP-CB12ip Cobalt iP Analog Point Motor (12 Pack)","description":"\u003cp\u003eTwelve Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/strong\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cobalt iP’s super-low static current draw means very low power bus loading and the Cobalt iP is also able to cope with a very wide range of DC power supply voltages. We prefer 9~12V regulated power but any voltage from 7 to 23 volts is acceptable. Similarly, connection via an accessory decoder to a wide range of DCC track voltage is also OK – covering the full spectrum of DCC standards, 9~24V. For DCC control we strongly recommend that you use our AD8fx decoders to add additional functionality not available from other brands.\u003c\/p\u003e\n\u003cp\u003eThe Cobalt iP is supplied with the throw bar already centred for easy installation and it has\u003cspan\u003e \u003c\/span\u003e\u003cu\u003ethree\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e“break before make” changeover switches. One is a low power SPDT switch linked to the Cobalt iP drive power directly to allow easy connection of low current lighting (for example panels or signals) or for linking to your computer or system control to report turnout position. The other two are super high power SPDT switches suitable for up to 5 amps continuous power handling and so are usable for frog polarity, interlocking or many similar applications.\u003c\/p\u003e\n\u003cp\u003eBecause Cobalt-IP “Intelligent Power” Analog motors are switched with reversing DC power, the LEDs for control panel indication can simply be put in-line with power leads! You can then use all the switching for other layout needs.\u003c\/p\u003e\n\u003cp\u003eYou can also have it both ways with the Cobalt iP. Just add digital control with our Cobalt AD8fx accessory decoders and still retain the ability for both conventional control panel as well as DCC or computer control at any time!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542063688,"sku":"DCC-DCP-CB12ip","price":203.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CB12ip.png?v=1604504717"},{"product_id":"dcc-concepts-dcp-cb1dip-cobalt-ip-digital-point-motor-single-pack","title":"DCP-CB1DIP Cobalt iP Digital Point Motor (Single Pack)","description":"\u003cp\u003eOne Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use \u003cstrong\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/strong\u003e!\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cobalt-iP Digital’s super-low static current draw means very low power bus loading and the Cobalt-iP Digital is also able to cope with a very wide range of DC or DCC power supply voltages. We prefer 9~12V regulated power for DC, but any DCC voltage from 7 to 23 volts is acceptable.\u003c\/p\u003e\n\u003cp\u003eCobalt-iP Digital is supplied with the throw bar already centred for easy installation.\u003c\/p\u003e\n\u003cp\u003eYou can activate and de-activate self-centring and even swap the throw direction with a simple software command. This allows easy matching to layout needs, software driven computer displays, track diagrams or computer control.\u003c\/p\u003e\n\u003cp\u003eWith Cobalt-IP “Intelligent Power” Digital Motors, you also have all the connection versatility you could ever need already built in. Frog power needs only one added wire, and a totally separate SPDT changeover switch can facilitate interlocking, control of signal feather indicators or ground signals, etc.\u003c\/p\u003e\n\u003cp\u003eCobalt iP Digital also features the ability to add panel switches or control via DCC. The connection terminals used for panel switch connection are also able to give direct high\/low state computer or DCC system feedback, so one motor really CAN do it all.\u003c\/p\u003e\n\u003cp\u003eAdd to the above the ability to work with DC and super-simple wiring or DCC operation, or to combine digital and analog control… and Cobalt iP Digital really is the best choice for all layouts, no matter how you choose to power the trains!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542129224,"sku":"DCC-DCP-CB1DIP","price":26.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CB1DIP.jpg?v=1604504717"},{"product_id":"dcc-concepts-dcp-cb1ip-cobalt-ip-analogue-point-motor-single-pack","title":"DCP-CB1ip Cobalt iP Analogue Point Motor (Single Pack)","description":"\u003cp\u003eOne Cobalt iP Analog “Intelligent Power” Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e!\u003c\/p\u003e\n\u003cp\u003eThe Cobalt iP’s super-low static current draw means very low power bus loading and the Cobalt iP is also able to cope with a very wide range of DC power supply voltages. We prefer 9~12V regulated power but any voltage from 7 to 23 volts is acceptable. Similarly, connection via an accessory decoder to a wide range of DCC track voltage is also OK – covering the full spectrum of DCC standards, 9~24V. For DCC control we strongly recommend that you use our AD8fx decoders to add additional functionality not available from other brands.\u003c\/p\u003e\n\u003cp\u003eThe Cobalt iP is supplied with the throw bar already centred for easy installation and it has\u003cspan\u003e \u003c\/span\u003e\u003cu\u003ethree\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e“break before make” changeover switches. One is a low power SPDT switch linked to the Cobalt iP drive power directly to allow easy connection of low current lighting (for example panels or signals) or for linking to your computer or system control to report turnout position. The other two are super high power SPDT switches suitable for up to 5 amps continuous power handling and so are usable for frog polarity, interlocking or many similar applications.\u003c\/p\u003e\n\u003cp\u003eBecause Cobalt-IP “Intelligent Power” Analog motors are switched with reversing DC power, the LEDs for control panel indication can simply be put in-line with power leads! You can then use all the switching for other layout needs.\u003c\/p\u003e\n\u003cp\u003eYou can also have it both ways with the Cobalt iP. Just add digital control with our Cobalt AD8fx accessory decoders and still retain the ability for both conventional control panel as well as DCC or computer control at any time!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542161992,"sku":"DCC-DCP-CB1ip","price":19.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CB1IP.jpg?v=1604504718"},{"product_id":"dcc-concepts-dcp-cb6dip-cobalt-ip-digital-point-motor-6-pack","title":"DCP-CB6Dip Cobalt iP Digital Point Motor (6 Pack)","description":"\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eCobalt iP Digital (6 Pack) “Intelligent Power” DCC\/DIGITAL Point Motors\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cp\u003eCobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor\u003c\/p\u003e\n\u003cp\u003eSix Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use \u003cstrong\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThe Cobalt-iP Digital’s super-low static current draw means very low power bus loading and the Cobalt-iP Digital is also able to cope with a very wide range of DC or DCC power supply voltages. We prefer 9~12V regulated power for DC, but any DCC voltage from 7 to 23 volts is acceptable.\u003c\/p\u003e\n\u003cp\u003eCobalt-iP Digital is supplied with the throw bar already centred for easy installation.\u003c\/p\u003e\n\u003cp\u003eYou can activate and de-activate self-centring and even swap the throw direction with a simple software command. This allows easy matching to layout needs, software driven computer displays, track diagrams or computer control.\u003c\/p\u003e\n\u003cp\u003eWith Cobalt-IP “Intelligent Power” Digital Motors, you also have all the connection versatility you could ever need already built in. Frog power needs only one added wire, and a totally separate SPDT changeover switch can facilitate interlocking, control of signal feather indicators or ground signals, etc.\u003c\/p\u003e\n\u003cp\u003eCobalt iP Digital also features the ability to add panel switches or control via DCC. The connection terminals used for panel switch connection are also able to give direct high\/low state computer or DCC system feedback, so one motor really CAN do it all.\u003c\/p\u003e\n\u003cp\u003eAdd to the above the ability to work with DC and super-simple wiring or DCC operation, or to combine digital and analog control… and Cobalt iP Digital really is the best choice for all layouts, no matter how you choose to power the trains!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542227528,"sku":"DCC-DCP-CB6Dip","price":152.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CB6DIP.png?v=1604504722"},{"product_id":"dcc-concepts-dcp-cb6ip-cobalt-ip-analog-point-motor-6-pack","title":"DCP-CB6iP Cobalt iP Analog Point Motor (6 Pack)","description":"\u003cp\u003eSix Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e!\u003c\/p\u003e\n\u003cp\u003eThe Cobalt iP’s super-low static current draw means very low power bus loading and the Cobalt iP is also able to cope with a very wide range of DC power supply voltages. We prefer 9~12V regulated power but any voltage from 7 to 23 volts is acceptable. Similarly, connection via an accessory decoder to a wide range of DCC track voltage is also OK – covering the full spectrum of DCC standards, 9~24V. For DCC control we strongly recommend that you use our AD8fx decoders to add additional functionality not available from other brands.\u003c\/p\u003e\n\u003cp\u003eThe Cobalt iP is supplied with the throw bar already centred for easy installation and it has\u003cspan\u003e \u003c\/span\u003e\u003cu\u003ethree\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e“break before make” changeover switches. One is a low power SPDT switch linked to the Cobalt iP drive power directly to allow easy connection of low current lighting (for example panels or signals) or for linking to your computer or system control to report turnout position. The other two are super high power SPDT switches suitable for up to 5 amps continuous power handling and so are usable for frog polarity, interlocking or many similar applications.\u003c\/p\u003e\n\u003cp\u003eBecause Cobalt-IP “Intelligent Power” Analog motors are switched with reversing DC power, the LEDs for control panel indication can simply be put in-line with power leads! You can then use all the switching for other layout needs.\u003c\/p\u003e\n\u003cp\u003eYou can also have it both ways with the Cobalt iP. Just add digital control with our Cobalt AD8fx accessory decoders and still retain the ability for both conventional control panel as well as DCC or computer control at any time!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542260296,"sku":"DCC-DCP-CB6iP","price":101.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CB6iP.png?v=1604504721"},{"product_id":"dcc-concepts-dcp-cb6mc-cobalt-ss-4-wire-colour-coded-cable-6m","title":"DCP-CB6MC Cobalt SS 4 Wire Colour Coded Cable (6m)","description":"\u003cp\u003e6 metres of extension cable for use with the Cobalt-SS Motors. This cable is ideal for motors which need to be placed away from the Control Board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6m Cobalt-SS Motor Wire\u003c\/li\u003e\n\u003cli\u003e12pcs Heat Shrink in four different colours\u003c\/li\u003e\n\u003cli\u003e3 x Red\u003c\/li\u003e\n\u003cli\u003e3 x Black\u003c\/li\u003e\n\u003cli\u003e3x Yellow\u003c\/li\u003e\n\u003cli\u003e3 x White\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542293064,"sku":"DCC-DCP-CB6MC","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CB6MC.jpg?v=1604504723"},{"product_id":"dcc-concepts-dcp-cb6omega-cobalt-classic-omega-analog-point-motor-six-pack","title":"Cobalt Classic Ω Omega Analog Point Motor (Six Pack)","description":"\u003cp\u003eSix Cobalt Classic Ω Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.\u003c\/p\u003e\n\u003cp\u003eSuitable for all gauges from large to very small, we even have an easy-to-use \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/railsofsheffield.com\/products\/dcc-concepts-dcw-tmp2-cobalt-turnout-motor-installation-template\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eCobalt Installation Template complete with Tools\u003c\/a\u003e\u003c\/span\u003e!\u003c\/p\u003e\n\u003cp\u003eWe recommend that you use a regulated DC power supply between 9 and 12V DC, although we do understand that some systems for larger scales have higher accessory voltage power supplies and that DCC accessory decoders may have higher output voltages. For this we’ve added a simple “voltage range change” switch to the Cobalt Classic Ω. This allows it to accept two power input ranges, 6~12V or 12~18V.\u003c\/p\u003e\n\u003cp\u003eThe Cobalt Ω is supplied with the throw bar already centred for easy installation and it has\u003cspan\u003e \u003c\/span\u003e\u003cu\u003ethree\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e“break before make” changeover switches. One is a low power SPDT switch linked to the Cobalt Ω drive power directly to allow easy connection of low current lighting (for example panels or signals) or for linking to your computer or system control to report turnout position. The other two are super high power SPDT switches suitable for up to 5 amps continuous power handling and so are usable for frog polarity, interlocking or many similar applications.\u003c\/p\u003e\n\u003cp\u003eBecause Cobalt Classic Ω Turnout Motors are switched with reversing DC power, the LEDs for control panel indication can simply be put in-line with power leads! You can then use all the switching for other layout needs.\u003c\/p\u003e\n\u003cp\u003eYou can also have it both ways with the Cobalt Ω. Just add digital control with our Cobalt accessory decoders and still retain the ability for both conventional control panel as well as DCC or computer control at any time!\u003c\/p\u003e\n\u003cp\u003eAll of this – with a lifetime warranty!\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eProduct Size:\u003c\/u\u003e\u003cbr\u003eWidth 28.5mm (67mm over the mounting wings)\u003cbr\u003eDepth 40mm (48mm over the mounting wings)\u003cbr\u003eHeight 44mm (67mm over the connector)\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542325832,"sku":"DCC-DCP-CB6omega","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCPCB6OMG.jpg?v=1604504724"},{"product_id":"dcc-concepts-dcp-cbrsl-cobalt-ss-short-50mm-y-connector-adaptor-3-reverse-cnnctn","title":"DCP-CBRSL Cobalt SS Short 50mm Y Connector Adaptor (3) Reverse Connection","description":"\u003cp\u003eCobalt-SS Reverse Connection Adaptors. Use these Cobalt-SS Reverse Connection Adaptors to control your Cobalt-SS motors in pairs, moving opposite each other.\u003c\/p\u003e  \u003cp\u003eContains 3x 50mm Universal extension leads.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542358600,"sku":"DCC-DCP-CBRSL","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CBRSL.jpg?v=1604504725"},{"product_id":"dcc-concepts-dcp-cbs12-cobalt-s-lever-12-pack","title":"DCP-CBS12 Cobalt-S Lever (12 Pack)","description":"\u003cp\u003e A twelve pack of Cobalt-S Signal Box Lever including all installation accessories.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/eHl2BM-6GSY\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eCobalt-S Levers bring a sense of reality to the control of model railways. They are a substantial high quality product that is 140mm (5-1\/2”) high, with a feel that has never been achieved before without long hours of skilled work on the modellers workbench. The footprint of the base is 60mm x 15mm\u003c\/p\u003e\n\u003cp\u003eThe moving part is a solid brass lever with working locking catch that gives a real feeling of action when moved, with a solidity and purpose reminiscent of the real thing. Added detail parts are also supplied with every switch to allow you to recreate a realistic bank of levers, complete with etched brass numbering for each lever.\u003c\/p\u003e\n\u003cp\u003eThey have an incredible versatility: Incorporating one SPDT changeover switch for solenoid or momentary power contact operations and two make-before-break SPDT On-On changeover switches they can literally operate ANY electrical or electronic device that has ever been invented for use on a model railway…\u003c\/p\u003e\n\u003cp\u003eDespite this ability the Cobalt-S is very easy to connect and understand. It is also a switch that will happily group together just like the prototype but also comes complete with a subtle added spacer for those with larger fingers.\u003c\/p\u003e\n\u003cp\u003eThere are simply NO limits, so you can create a local control position or recreate the classic major signal box of a large yard or city station.\u003c\/p\u003e\n\u003cp\u003eComprehensive manuals are available covering many subjects, from simple solenoid or motor drive control to interlocked scissors crossings and the like. For those with special questions, we are happy to provide one-on-one email or forum support.\u003c\/p\u003e\n\u003cp\u003eWatch Jenny Kirk's review here:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/PNNa4kF5_G4\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542391368,"sku":"DCC-DCP-CBS12","price":179.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/dcp-cbs12-levers-w.jpg?v=1604504758"},{"product_id":"dcc-concepts-dcp-cbs6-cobalt-s-lever-6-pack","title":"DCP-CBS6 Cobalt-S Lever (6 Pack)","description":"\u003cp\u003eCobalt-S Levers bring a sense of reality to the control of model railways. They are a substantial high quality product that is 140mm (5-1\/2”) high, with a feel that has never been achieved before without long hours of skilled work on the modellers workbench. The footprint of the base is 60mm x 15mm\u003c\/p\u003e\n\u003cp\u003eThe moving part is a solid brass lever with working locking catch that gives a real feeling of action when moved, with a solidity and purpose reminiscent of the real thing. Added detail parts are also supplied with every switch to allow you to recreate a realistic bank of levers, complete with etched brass numbering for each lever.\u003c\/p\u003e\n\u003cp\u003eThey have an incredible versatility: Incorporating one SPDT changeover switch for solenoid or momentary power contact operations and two make-before-break SPDT On-On changeover switches they can literally operate ANY electrical or electronic device that has ever been invented for use on a model railway…\u003c\/p\u003e\n\u003cp\u003eDespite this ability the Cobalt-S is very easy to connect and understand. It is also a switch that will happily group together just like the prototype but also comes complete with a subtle added spacer for those with larger fingers.\u003c\/p\u003e\n\u003cp\u003eThere are simply NO limits, so you can create a local control position or recreate the classic major signal box of a large yard or city station.\u003c\/p\u003e\n\u003cp\u003eComprehensive manuals are available covering many subjects, from simple solenoid or motor drive control to interlocked scissors crossings and the like. For those with special questions, we are happy to provide one-on-one email or forum support.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542424136,"sku":"DCC-DCP-CBS6","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBS6.png?v=1615395151"},{"product_id":"dcc-concepts-dcp-cbs-cobalt-s-lever-single-pack","title":"DCP-CBS Cobalt-S Lever (Single Pack)","description":"\u003cp\u003eCobalt-S Levers bring a sense of reality to the control of model railways. They are a substantial high quality product that is 140mm (5-1\/2”) high, with a feel that has never been achieved before without long hours of skilled work on the modellers workbench. The footprint of the base is 60mm x 15mm\u003c\/p\u003e\n\u003cp\u003eThe moving part is a solid brass lever with working locking catch that gives a real feeling of action when moved, with a solidity and purpose reminiscent of the real thing. Added detail parts are also supplied with every switch to allow you to recreate a realistic bank of levers, complete with etched brass numbering for each lever.\u003c\/p\u003e\n\u003cp\u003eThey have an incredible versatility: Incorporating one SPDT changeover switch for solenoid or momentary power contact operations and two make-before-break SPDT On-On changeover switches they can literally operate ANY electrical or electronic device that has ever been invented for use on a model railway…\u003c\/p\u003e\n\u003cp\u003eDespite this ability the Cobalt-S is very easy to connect and understand. It is also a switch that will happily group together just like the prototype but also comes complete with a subtle added spacer for those with larger fingers.\u003c\/p\u003e\n\u003cp\u003eThere are simply NO limits, so you can create a local control position or recreate the classic major signal box of a large yard or city station.\u003c\/p\u003e\n\u003cp\u003eComprehensive manuals are available covering many subjects, from simple solenoid or motor drive control to interlocked scissors crossings and the like. For those with special questions, we are happy to provide one-on-one email or forum support.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542489672,"sku":"DCC-DCP-CBS","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBS.png?v=1626550988"},{"product_id":"dcc-concepts-dcp-cbsdc-cobalt-ip-analogue-and-omega-switch-pack-with-leds-red-and-green","title":"DCP-CBSDC Cobalt iP Analogue and Omega Switch Pack with LEDs (RED and GREEN)","description":"\u003cp\u003eSIX plug \u0026amp; play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs.\u003c\/p\u003e  \u003cp\u003eAvailable with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster installation and giving you more time for driving trains!\u003c\/p\u003e  \u003cp\u003eThere are 6 sets of switches and 12 LEDs in each pack. The switches are standard 1\/4″ hole mount. The LEDs plug into the switches and are designed to be “push-fit” into your panel – all you have to do is use the correct drill size for the easiest control panel creation that you have ever had!\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542522440,"sku":"DCC-DCP-CBSDC","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBSDC-B.png?v=1698493780"},{"product_id":"dcc-concepts-dcp-cbsgr-cobalt-ip-analogue-and-omega-switch-pack-with-leds-green","title":"DCP-CBSGR Cobalt iP Analogue and Omega Switch Pack with LEDs (GREEN)","description":"\u003cp\u003eThis pack contains six miniature toggle switches attached to a pre soldered PCB and twelve pre-wired LEDs which just plug into the PCB via the small white plugs. These switches are designed for use with the Cobalt IP and Omega point motors amd require the Split Rail Power Supply.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542555208,"sku":"DCC-DCP-CBSGR","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBSGR-C.png?v=1698493874"},{"product_id":"dcc-concepts-dcp-cbsll-cobalt-ss-long-1m-extension-leads-3","title":"DCP-CBSLL Cobalt SS Long 1m Extension Leads (3)","description":"\u003cp\u003ePlug and Play Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. This pack contains 3 x 1m Extension Cables.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eMeasurements:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eCable Length: 1m\u003c\/li\u003e  \u003c\/ul\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542587976,"sku":"DCC-DCP-CBSLL","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CBSLL.jpg?v=1604504772"},{"product_id":"dcc-concepts-dcp-cbsml-cobalt-ss-medium-600mm-extension-leads-3","title":"DCP-CBSML Cobalt SS Medium 600mm Extension Leads (3)","description":"\u003cp\u003ePlug and Play Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. This pack contains 3 x 600mm Extension Cables.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eMeasurements:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eCable Length: 600mm\u003c\/li\u003e  \u003c\/ul\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542620744,"sku":"DCC-DCP-CBSML","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CBSML.jpg?v=1604504762"},{"product_id":"dcc-concepts-dcp-cbsrd-cobalt-ip-analogue-and-omega-switch-pack-with-leds-red","title":"DCP-CBSRD Cobalt iP Analogue and Omega Switch Pack with LEDs (RED)","description":"\u003cp\u003eSIX plug \u0026amp; play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs.\u003c\/p\u003e  \u003cp\u003eAvailable with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster installation and giving you more time for driving trains!\u003c\/p\u003e  \u003cp\u003eThere are 6 sets of switches and 12 LEDs in each pack. The switches are standard 1\/4″ hole mount. The LEDs plug into the switches and are designed to be “push-fit” into your panel – all you have to do is use the correct drill size for the easiest control panel creation that you have ever had!\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542653512,"sku":"DCC-DCP-CBSRD","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBSRD-B.png?v=1698494618"},{"product_id":"dcc-concepts-dcp-cbss-12-cobalt-ss-surface-mount-point-motors-with-controllers-and-accessories-12-pack","title":"DCP-CBSS-12 Cobalt SS Surface Mount Point Motors with Controllers and Accessories (12 Pack)","description":"\u003cp\u003e\u003cstrong\u003ePack of 12\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSlow action surface mounted point motors for use with all sorts of different gauges from N to O. This pack contains Cobalt-SS Above-Board Point Motors with “Plug \u0026amp; Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC command, conventional switches or both.\u003c\/p\u003e\n\u003cp\u003eThe pack also contains the following accessory leads and accessories:\u003c\/p\u003e\n\u003cp\u003e3x Cobalt-SS Extension Cable (600mm) to enable motors to be mounted further away from the Control Board. 3x Cobalt-SS Y-connection or reverse connection cable to enable two or more motors to be connected to one output on the Control Board. Linkage pack – to connect your Cobalt-SS motor to your turnout. Mounting screws – to install both the Cobalt-SS motors and the control boards.\u003c\/p\u003e","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542686280,"sku":"DCC-DCP-CBSS-12","price":289.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBSS-12-B.jpg?v=1615395182"},{"product_id":"dcc-concepts-dcp-cbss-2-cobalt-ss-surface-mount-point-motor-with-controller-and-accessories-2-pack","title":"DCP-CBSS-2 Cobalt SS Surface Mount Point Motor (2 Pack) with Controller and Accessories","description":"\u003cp\u003eSlow action surface mounted point motors for use with all sorts of different gauges from N to O. This pack contains Cobalt-SS Above-Board Point Motors with “Plug \u0026amp; Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC command, conventional switches or both.\u003c\/p\u003e  \u003cp\u003eThe pack also contains the following accessory leads and accessories:\u003c\/p\u003e  \u003cp\u003e1x Cobalt-SS Extension Cable (600mm) to enable motors to be mounted further away from the Control Board.  1x Cobalt-SS Y-connection or reverse connection cable to enable two or more motors to be connected to one output on the Control Board.  Linkage pack – to connect your Cobalt-SS motor to your turnout.  Mounting screws – to install both the Cobalt-SS motors and the control boards.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eMotor Size:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eWidth 27mm\u003c\/li\u003e  \u003cli\u003eDepth 14mm\u003c\/li\u003e  \u003cli\u003eHeight 11mm\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eControl Board Size:\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e  \u003cli\u003eWidth 115mm\u003c\/li\u003e  \u003cli\u003eDepth 60mm\u003c\/li\u003e  \u003cli\u003eHeight 25mm\u003c\/li\u003e  \u003c\/ul\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542719048,"sku":"DCC-DCP-CBSS-2","price":50.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCDCP-CBSS-2.jpg?v=1683634213"},{"product_id":"dcc-concepts-dcp-cbss-6-cobalt-ss-surface-mount-point-motor-with-controllers-and-accessories-6-pack","title":"DCP-CBSS-6 Cobalt SS Surface Mount Point Motor with Controllers And Accessories (6 Pack)","description":"\u003cp\u003eSlow action surface mounted point motors for use with all sorts of different gauges from N to O. This pack contains Cobalt-SS Above-Board Point Motors with “Plug \u0026amp; Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC command, conventional switches or both.\u003c\/p\u003e  \u003cp\u003eThe pack also contains the following accessory leads and accessories:\u003c\/p\u003e  \u003cp\u003e2x Cobalt-SS Extension Cable (600mm) to enable motors to be mounted further away from the Control Board.  2x Cobalt-SS Y-connection or reverse connection cable to enable two or more motors to be connected to one output on the Control Board.  Linkage pack – to connect your Cobalt-SS motor to your turnout.  Mounting screws – to install both the Cobalt-SS motors and the control boards.\u003c\/p\u003e  ","brand":"Layout Concepts","offers":[{"title":"Default Title","offer_id":35450542751816,"sku":"DCC-DCP-CBSS-6","price":144.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2858\/9896\/products\/DCP-CBSS-6-B.jpg?v=1615395190"}],"url":"https:\/\/railsofsheffield.com\/collections\/point-motors.oembed?page=7","provider":"Rails of Sheffield","version":"1.0","type":"link"}